Switch socket ten fire hazards.

Socket 1, Restroom to install splash box, to avoid the water splashing such as the formation of circuit breaker.

2, the jack is combustible dust from a short circuit, or installed in the inflammable and explosive dangerous places, insert or spark plugs, causing the explosion and fire.

3, not timely replacement of damaged plugs, plug replaced by the use of thrum,causing short circuit or spark, causing fuel fire.

4, some bedside switches used readily in a release, switches collision as the bunk beds or walls damaged by the insulation layer,the most likely cause short-circuit.

Working voltage and current, 5 lamp power sockets are incompatible with the use,long-term overload, high temperature will cause fires once. Socket Sanxiong auroraare super limit 16A flow, can meet the needs of all industrial and domestic normal electricity. Some of the other switches are generally 10A current limit, when the family a little electricity power, it will cause a fire.

Wire 6, paperback mouth or screw lampholders or multi eye socket with the end insulation exhumation. For too long, exposed part of a short-circuit conductor; too short, poor contact, the contact resistance is too large, overheating and causing a fire.

7, the installation process according to the lamp holder lamp holder and the wiretwisted together, or bare wire core too much,loose ends after encountered anotherfire caused by short circuit.

8, switch is installed properly, especially the switch installed in flammable objects, in the lead the source sheath is abrasion, thecore is exposed or water vapor penetration, causing a short circuit, or switch off the arc is generated by the fire.

9, the power distribution board not into the box, fuse will have metal particles hotsplash, the lower fuel combustion.

Combustible gas 10, family use by pipeline or valve leakage, the combustible gas and air mixing reaches the explosion limit,, noelectrical switch arc suppression device, a spark, causing a fire or explosion..